Elevator Cables / Travelling Flat Cables

Elevator Cables / Travelling Flat Cables

WhatsApp us

ALECTOCAB™ Elevator Cables / Travelling Flat Cables are specially designed for continuous flexing, repeated bending and dynamic movement between elevator cars and fixed electrical systems.

Constructed using flexible Class 5 annealed copper conductors with elastomer-blended PVC insulation, these cables support reliable power, control and data transmission in suitable elevator installations.

Available in 300/500V and 450/750V voltage grades, the range includes flat, bundle, composite and SBM cable constructions, with 4 to 48 cores and conductor sizes ranging from 0.50 to 25 mm².

Optional shielded data pairs are available for elevator communication and control circuits, while flame-retardant outer sheath options provide additional fire-performance characteristics according to the selected cable specification.

Selected cable configurations support suspension lengths up to 120 metres and elevator operating speeds up to 6.3 m/s, subject to the complete cable design and installation conditions.

Suitable for passenger elevators, panoramic lifts, service elevators, high-rise lift systems and dumbwaiters.

Custom core layouts, project-specific constructions and bulk supply options are available for elevator manufacturers, contractors and modernisation projects.

Flexible Elevator Travelling Cables for Reliable Power, Control & Data Transmission

ALECTOCAB™ Elevator Cables / Travelling Flat Cables are specialised flexible electrical cables designed for continuous movement between elevator cars and fixed electrical installations in modern lift systems.

Unlike conventional fixed-installation cables, elevator travelling cables operate under repeated bending, suspension loads and dynamic movement throughout the elevator’s operating cycle.

ALECTOCAB™ Elevator Travelling Flat Cables are designed to accommodate these demanding operating conditions while supporting dependable transmission of electrical power, control signals and compatible data connections.

The cable range incorporates flexible Class 5 annealed copper conductors, providing suitable conductor flexibility for travelling cable installations requiring repeated bending and movement.

Class 5 copper conductors are constructed using fine copper strands, allowing greater flexibility than conventional rigid conductor constructions.

The cables use elastomer-blended PVC insulation to provide electrical insulation with suitable flexibility for dynamic elevator installations.

This insulation construction helps accommodate repeated cable movement while maintaining electrical separation between conductors under the specified operating conditions.

ALECTOCAB™ Elevator Cables are available in 300/500V and 450/750V voltage grades, depending on the selected cable construction and electrical requirements.

The range includes flat, bundle, composite and SBM cable configurations to accommodate different elevator wiring arrangements, installation requirements and cable-management designs.

Flat travelling cables provide a compact, organised conductor arrangement suitable for selected elevator installations.

Bundle and composite constructions offer alternative cable arrangements for projects requiring different combinations of power, control and communication circuits.

The cable range includes configurations with 4 to 48 cores and conductor cross-sectional areas ranging from 0.50 to 25 mm².

This range supports different elevator electrical requirements, from smaller control circuits to suitable power and equipment connections.

For elevator systems requiring communication or data transmission, optional shielded data pairs are available in selected cable constructions.

Shielded data pairs help reduce the influence of electromagnetic interference on compatible signal circuits when correctly designed, terminated and installed.

ALECTOCAB™ Elevator Travelling Cables also include flame-retardant outer sheath options to support selected electrical safety and installation requirements.

Selected cable constructions are designed for suspension lengths up to 120 metres and elevator operating speeds up to 6.3 metres per second.

The permitted suspension length and operating speed depend on the specific cable construction, hanging arrangement, support method, bending conditions and elevator system design.

ALECTOCAB™ Elevator Cables are suitable for passenger elevators, panoramic elevators, service lifts, high-rise elevator installations, dumbwaiters and other compatible lift systems.

The product range can also accommodate project-specific core arrangements and cable configurations for elevator equipment manufacturers, installation contractors and lift modernisation requirements.

Whether you require Flat Elevator Travelling Cables, Flexible Lift Control Cables, Shielded Elevator Communication Cables or Composite Elevator Cables, ALECTOCAB™ offers suitable cable configurations with technical guidance and bulk project supply options.

Key Features and Benefits

Flexible Class 5 Annealed Copper Conductors

Constructed using flexible Class 5 annealed copper conductors to provide dependable electrical conductivity and flexibility for suitable repeated-bending elevator installations.

Elastomer-Blended PVC Insulation

Uses elastomer-blended PVC insulation designed to provide electrical insulation and flexibility for travelling cable applications involving dynamic movement.

300/500V & 450/750V Voltage Grades

Available in 300/500V and 450/750V voltage options to accommodate different elevator power, control and electrical system requirements.

Flat, Bundle, Composite & SBM Constructions

Available in multiple cable constructions to support different conductor arrangements, installation designs and elevator system requirements.

4 to 48 Core Configurations

Offers cable configurations ranging from 4 to 48 cores, allowing suitable combinations of electrical circuits within the selected cable design.

Conductor Sizes from 0.50 to 25 mm²

Available in conductor cross-sectional areas ranging from 0.50 to 25 mm² for different electrical load and control circuit requirements.

Optional Shielded Data Pairs

Selected cable constructions include shielded data pairs to help manage electromagnetic interference in compatible elevator communication and signal circuits.

Flame-Retardant Outer Sheath

Flame-retardant outer sheath options are available for selected elevator cable configurations, subject to the applicable fire-performance specification.

Suspension Lengths Up to 120 Metres

Selected cable constructions support suspension lengths up to 120 metres when installed according to the required mechanical and cable-support conditions.

Elevator Speeds Up to 6.3 m/s

Suitable cable configurations are available for elevator systems operating at speeds up to 6.3 metres per second, subject to cable design and installation requirements.

Technical Specifications

ComponentSpecification
Product TypeElevator Cable / Travelling Flat Cable
Conductor MaterialAnnealed Copper
Conductor ClassClass 5 Flexible
Insulation MaterialElastomer-Blended PVC
Voltage Grades300/500V / 450/750V
Cable ConstructionsFlat / Bundle / Composite / SBM
Number of Cores4 to 48 Cores
Conductor Size0.50 to 25 mm²
Data TransmissionOptional Shielded Data Pairs
ShieldingSelected Data Pair Configurations
Outer SheathFlame-Retardant Options
Cable MovementDynamic / Repeated Flexing
Maximum Specified Suspension LengthUp to 120 m
Maximum Specified Elevator SpeedUp to 6.3 m/s
Primary FunctionsPower / Control / Data Transmission
Installation TypeElevator Travelling / Suspended Cable
Core ArrangementStandard / Customised
Cable ConfigurationProject-Specific Options
Primary ApplicationsPassenger / Panoramic / Service / High-Rise Elevators / Dumbwaiters
Supply TypeOEM / Contractor / Project / Bulk Supply

The maximum suspension length and elevator speed are configuration-dependent capabilities, not universal ratings for every cable in the range. Final core arrangement, conductor size, overall dimensions, cable weight, bending radius, mechanical loading, voltage rating and dynamic performance must be verified against the selected cable datasheet and elevator installation requirements.

Why Choose ALECTOCAB™ Elevator Travelling Flat Cables?

  • Elastomer-blended PVC insulation for travelling cable applications
  • Conductor sizes from 0.50 to 25 mm²
  • Optional shielded data pairs for compatible signal circuits
  • Flexible Class 5 annealed copper conductor construction
  • Available 300/500V and 450/750V voltage grades
  • Flat, bundle, composite and SBM cable constructions
  • Configurations ranging from 4 to 48 cores
  • Flame-retardant outer sheath options
  • Selected suspension lengths up to 120 m and speeds up to 6.3 m/s
  • Custom core layouts and OEM or bulk elevator project supply

Ordering Information

  • Required Cable Construction: Flat / Bundle / Composite / SBM
  • Conductor Material & Class: Class 5 Flexible Annealed Copper
  • Required Conductor Size: 0.50 to 25 mm²
  • Number of Cores: 4 to 48 Cores
  • Voltage Grade: 300/500V / 450/750V
  • Core Layout: Standard / Customised Power, Control and Data Arrangement
  • Shielding Requirement: Shielded Data Pairs Required / Not Required
  • Suspension Requirements: Free-Hanging Length, Travel Height and Support Arrangement
  • Elevator Operating Conditions: Rated Speed, Movement Pattern and Bending Requirements
  • Supply Requirements: Cable Length, Total Quantity and Applicable Project Specifications

Our team can review your technical requirements and discuss suitable Silicone Rubber Cable configurations for your electrical or industrial project.

What is an Elevator Travelling Flat Cable?

An Elevator Travelling Flat Cable is a specialised flexible cable designed to move with an elevator car while transmitting electrical power, control signals and compatible communication signals between moving and fixed equipment.

Elevator Travelling Cables are used in passenger elevators, panoramic lifts, service elevators, high-rise lift systems, dumbwaiters and other compatible elevator installations.

Flexible conductors help accommodate repeated bending and movement during elevator operation. ALECTOCAB™ uses Class 5 annealed copper conductors for suitable travelling cable constructions.

ALECTOCAB™ Elevator Cables are available in 300/500V and 450/750V voltage grades, depending on the selected construction.

The specified range includes cable configurations from 4 to 48 cores, with conductor sizes ranging from 0.50 to 25 mm².

Flat Elevator Cables arrange conductors in a flat cable profile. Composite Elevator Cables combine different circuit elements or conductor arrangements within a single cable construction according to the elevator system’s requirements.

Yes. Selected ALECTOCAB™ Elevator Cable configurations include optional shielded data pairs for compatible communication and control circuits.

Selected cable configurations support suspension lengths up to 120 metres, subject to the cable construction, support arrangement and mechanical installation requirements.

Selected ALECTOCAB™ Elevator Travelling Cable configurations are specified for elevator speeds up to 6.3 m/s. Suitability must be confirmed for the actual lift system, suspension length and movement conditions.

Yes. Nilesh Enterprises accepts enquiries for ALECTOCAB™ Elevator Cables with customised core layouts, conductor sizes, shielding arrangements and project-specific configurations for OEM, contractor and bulk elevator projects.

© ALECTOCAB™ is a trademark of Nilesh Enterprises. All Rights Reserved.