Elevator Cables / Travelling Flat Cables
WhatsApp us
ALECTOCAB™ Elevator Cables / Travelling Flat Cables are specially designed for continuous flexing, repeated bending and dynamic movement between elevator cars and fixed electrical systems.
Constructed using flexible Class 5 annealed copper conductors with elastomer-blended PVC insulation, these cables support reliable power, control and data transmission in suitable elevator installations.
Available in 300/500V and 450/750V voltage grades, the range includes flat, bundle, composite and SBM cable constructions, with 4 to 48 cores and conductor sizes ranging from 0.50 to 25 mm².
Optional shielded data pairs are available for elevator communication and control circuits, while flame-retardant outer sheath options provide additional fire-performance characteristics according to the selected cable specification.
Selected cable configurations support suspension lengths up to 120 metres and elevator operating speeds up to 6.3 m/s, subject to the complete cable design and installation conditions.
Suitable for passenger elevators, panoramic lifts, service elevators, high-rise lift systems and dumbwaiters.
Custom core layouts, project-specific constructions and bulk supply options are available for elevator manufacturers, contractors and modernisation projects.
ALECTOCAB™ Elevator Cables / Travelling Flat Cables are specialised flexible electrical cables designed for continuous movement between elevator cars and fixed electrical installations in modern lift systems.
Unlike conventional fixed-installation cables, elevator travelling cables operate under repeated bending, suspension loads and dynamic movement throughout the elevator’s operating cycle.
ALECTOCAB™ Elevator Travelling Flat Cables are designed to accommodate these demanding operating conditions while supporting dependable transmission of electrical power, control signals and compatible data connections.
The cable range incorporates flexible Class 5 annealed copper conductors, providing suitable conductor flexibility for travelling cable installations requiring repeated bending and movement.
Class 5 copper conductors are constructed using fine copper strands, allowing greater flexibility than conventional rigid conductor constructions.
The cables use elastomer-blended PVC insulation to provide electrical insulation with suitable flexibility for dynamic elevator installations.
This insulation construction helps accommodate repeated cable movement while maintaining electrical separation between conductors under the specified operating conditions.
ALECTOCAB™ Elevator Cables are available in 300/500V and 450/750V voltage grades, depending on the selected cable construction and electrical requirements.
The range includes flat, bundle, composite and SBM cable configurations to accommodate different elevator wiring arrangements, installation requirements and cable-management designs.
Flat travelling cables provide a compact, organised conductor arrangement suitable for selected elevator installations.
Bundle and composite constructions offer alternative cable arrangements for projects requiring different combinations of power, control and communication circuits.
The cable range includes configurations with 4 to 48 cores and conductor cross-sectional areas ranging from 0.50 to 25 mm².
This range supports different elevator electrical requirements, from smaller control circuits to suitable power and equipment connections.
For elevator systems requiring communication or data transmission, optional shielded data pairs are available in selected cable constructions.
Shielded data pairs help reduce the influence of electromagnetic interference on compatible signal circuits when correctly designed, terminated and installed.
ALECTOCAB™ Elevator Travelling Cables also include flame-retardant outer sheath options to support selected electrical safety and installation requirements.
Selected cable constructions are designed for suspension lengths up to 120 metres and elevator operating speeds up to 6.3 metres per second.
The permitted suspension length and operating speed depend on the specific cable construction, hanging arrangement, support method, bending conditions and elevator system design.
ALECTOCAB™ Elevator Cables are suitable for passenger elevators, panoramic elevators, service lifts, high-rise elevator installations, dumbwaiters and other compatible lift systems.
The product range can also accommodate project-specific core arrangements and cable configurations for elevator equipment manufacturers, installation contractors and lift modernisation requirements.
Whether you require Flat Elevator Travelling Cables, Flexible Lift Control Cables, Shielded Elevator Communication Cables or Composite Elevator Cables, ALECTOCAB™ offers suitable cable configurations with technical guidance and bulk project supply options.
Constructed using flexible Class 5 annealed copper conductors to provide dependable electrical conductivity and flexibility for suitable repeated-bending elevator installations.
Uses elastomer-blended PVC insulation designed to provide electrical insulation and flexibility for travelling cable applications involving dynamic movement.
Available in 300/500V and 450/750V voltage options to accommodate different elevator power, control and electrical system requirements.
Available in multiple cable constructions to support different conductor arrangements, installation designs and elevator system requirements.
Offers cable configurations ranging from 4 to 48 cores, allowing suitable combinations of electrical circuits within the selected cable design.
Available in conductor cross-sectional areas ranging from 0.50 to 25 mm² for different electrical load and control circuit requirements.
Selected cable constructions include shielded data pairs to help manage electromagnetic interference in compatible elevator communication and signal circuits.
Flame-retardant outer sheath options are available for selected elevator cable configurations, subject to the applicable fire-performance specification.
Selected cable constructions support suspension lengths up to 120 metres when installed according to the required mechanical and cable-support conditions.
Suitable cable configurations are available for elevator systems operating at speeds up to 6.3 metres per second, subject to cable design and installation requirements.
| Component | Specification |
|---|---|
| Product Type | Elevator Cable / Travelling Flat Cable |
| Conductor Material | Annealed Copper |
| Conductor Class | Class 5 Flexible |
| Insulation Material | Elastomer-Blended PVC |
| Voltage Grades | 300/500V / 450/750V |
| Cable Constructions | Flat / Bundle / Composite / SBM |
| Number of Cores | 4 to 48 Cores |
| Conductor Size | 0.50 to 25 mm² |
| Data Transmission | Optional Shielded Data Pairs |
| Shielding | Selected Data Pair Configurations |
| Outer Sheath | Flame-Retardant Options |
| Cable Movement | Dynamic / Repeated Flexing |
| Maximum Specified Suspension Length | Up to 120 m |
| Maximum Specified Elevator Speed | Up to 6.3 m/s |
| Primary Functions | Power / Control / Data Transmission |
| Installation Type | Elevator Travelling / Suspended Cable |
| Core Arrangement | Standard / Customised |
| Cable Configuration | Project-Specific Options |
| Primary Applications | Passenger / Panoramic / Service / High-Rise Elevators / Dumbwaiters |
| Supply Type | OEM / Contractor / Project / Bulk Supply |
The maximum suspension length and elevator speed are configuration-dependent capabilities, not universal ratings for every cable in the range. Final core arrangement, conductor size, overall dimensions, cable weight, bending radius, mechanical loading, voltage rating and dynamic performance must be verified against the selected cable datasheet and elevator installation requirements.
Our team can review your technical requirements and discuss suitable Silicone Rubber Cable configurations for your electrical or industrial project.
An Elevator Travelling Flat Cable is a specialised flexible cable designed to move with an elevator car while transmitting electrical power, control signals and compatible communication signals between moving and fixed equipment.
Elevator Travelling Cables are used in passenger elevators, panoramic lifts, service elevators, high-rise lift systems, dumbwaiters and other compatible elevator installations.
Flexible conductors help accommodate repeated bending and movement during elevator operation. ALECTOCAB™ uses Class 5 annealed copper conductors for suitable travelling cable constructions.
ALECTOCAB™ Elevator Cables are available in 300/500V and 450/750V voltage grades, depending on the selected construction.
The specified range includes cable configurations from 4 to 48 cores, with conductor sizes ranging from 0.50 to 25 mm².
Flat Elevator Cables arrange conductors in a flat cable profile. Composite Elevator Cables combine different circuit elements or conductor arrangements within a single cable construction according to the elevator system’s requirements.
Yes. Selected ALECTOCAB™ Elevator Cable configurations include optional shielded data pairs for compatible communication and control circuits.
Selected cable configurations support suspension lengths up to 120 metres, subject to the cable construction, support arrangement and mechanical installation requirements.
Selected ALECTOCAB™ Elevator Travelling Cable configurations are specified for elevator speeds up to 6.3 m/s. Suitability must be confirmed for the actual lift system, suspension length and movement conditions.
Yes. Nilesh Enterprises accepts enquiries for ALECTOCAB™ Elevator Cables with customised core layouts, conductor sizes, shielding arrangements and project-specific configurations for OEM, contractor and bulk elevator projects.
ALECTOCAB™, a brand of Nilesh Enterprises, has been delivering quality wires and cables since 2008. Based in Mumbai, India, we offer Power, Control, Instrumentation, Flexible, Shielded, Fire Safety and Data Cables, along with specialised cable solutions for industrial, commercial and infrastructure applications.
WhatsApp us